Industrial Closed Circuit Lime and Rust Remover
OPTICIDE LIME: This chemical product removes limestone, rust, and mineral deposits from cooling systems, heat exchangers, boilers, and water pipes by breaking them down at micron levels during circulation.
It does not harm metals such as copper and metal pipes, and it is successfully used in the construction industry to clean concrete and mortar residue.
It is safely used in the textile industry to clean sprinklers and pipe systems in humidification units, injection molding machines, molds, and cooling systems used in the plastics industry.
It is used for the interior and exterior cleaning of submersible, mud, and pool pumps; for removing lime residue from the floor walls and glass of swimming and ornamental pools; for removing cement residue stuck to the bodywork of vehicles used in concrete mixing and transportation; for removing lime and sediment caused by cooling water in pasteurization lines in canning; and for cleaning surfaces on marble processing machines and machines in the ceramic industry.
INSTRUCTIONS FOR USE
Cooling Systems: Drain the entire system. Refill the system to operating level. Add 10 liters of water/1 liter of OPTICIDE LIME. Circulate for 5-6 hours. Measure the pH of the water in the system. Add OPTICIDE LIME if necessary to maintain the pH between 1.5 and 2. Continue circulation. After 5-6 hours, drain and rinse the system. Repeat the process if necessary.
Direct Use: Mix one part OPTICIDE LIME with 5 parts water. Apply to the materials with a brush or cloth. Wait for a short time for it to penetrate and remove residue.
Immersion Method: Place the materials to be cleaned in a pool or plastic container and immerse them in the OPTICIDE LIME and water mixture. Wait until the residue dissolves. Then remove and rinse thoroughly with water.
USE DOSAGE
Use 1/5 to 1/10 of the product, depending on the total water volume.
| PRODUCT CODE | WEIGHT | PIECE | FORM |
| EH1844183 | 35 | 1 | LIQUID |
| EH1844187 | 70 | 1 | LIQUID |
| EH18441810 | 1250 | 1 | LIQUID |
Brand: Optimal
Weld Stain Remover Cream OPTINOX PASTE is a highly wetting agent designed for cleaning weld marks on stainless steel surfaces. Even if a weld spatter inhibitor is used during welding…
Brand: Optimal
Oil-Free Spray for Electrical Circuit Cleaning X-TRAX is a volatile cleaning solvent specially formulated for cleaning unwanted residues such as moisture, dust, and oil that accumulate…
Brand: Optimal
Liquid Product Used by Spraying to Coat Iron and Steel Surfaces with a Zinc Phosphate Layer
Brand: Optimal
Brand: Optimal
Biological, Penetrating, Lime, Rust and Metal Deburring Remover OPTIBIOL POWER PLUS is a super-concentrated lime, rust, and metal deburring remover with high wetting and penetrating…
Brand: Optimal
Neutral Cleaning and Disinfection Product for Floor Cleaning Machines OPTIMAT VF X505 is a water-soluble, environmentally friendly, super-concentrated, neutral, foam-controlled industrial…
Brand: Optimal
Basınçlı Döküm Kalıp Hattı Alkali Temizleyici OPTILINE ALCA, konsantre özel bileşimi ve yüksek alkali formüllü yapısı ile yüksek basınca,…
Brand: Optimal
Carbonic Acid Corrosion Inhibitor for Steam Generator; OPTIGARD MR 450 is a neutralizing liquid corrosion inhibitor specifically developed to eliminate carbon dioxide-induced corrosion…
Brand: Optimal
Nitrate-Containing Product Used to Correct the Zinc Value in the Bath in Zinc Phosphate Processes
Brand: Optimal
