High Performance Corrosion Inhibitor for Copper Wire Drawing and Alloys
OPTICOR WX 5500 is a water-soluble corrosion inhibitor specifically designed for application on copper rods at the end of continuous casting/rolling lines such as Contirod, Southwire, Krupp Hazelett, and Properzi, as well as on upstream casting lines such as Outokumpu and Rautomead.
APPLICATION BENEFITS
OPTICOR WX 5500 is a highly inhibited, water-soluble product with exceptional wetting and acid-resistant properties.
It provides a continuous, adherent film on the metal surface.
It protects copper and its alloys, zinc-galvanized coatings, against tarnishing during processing and against atmospheric conditions during storage and transportation.
INSTRUCTIONS FOR USE
OPTICOR WX 5500 is safely used to protect copper and its alloys, and zinc-galvanized coatings, against tarnishing due to oxidation or other adverse atmospheric conditions. It lubricates the passage of the processed rod through the winding tube.
For continuous casting lines: A concentration of 2.5–5% is recommended.
For vertical casting lines: A concentration of 5–15% is recommended.
Refractometer Reading = 2.5 x Reading
The temperature should be maintained between approximately 55 and 70°C.
The immersion time should be sufficient for the metal to reach bath temperature to promote rapid drying.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
OPT6479133 |
25 LT |
1 |
LIQUID |
|
OPT6469126 |
75 LT |
1 |
LIQUID |
|
OPT6469122 |
205 LT |
1 |
LIQUID |
|
OPT6469121 |
1000 LT |
1 |
LIQUID |
Brand: Optimal
Beton Kalıp Ayırıcı Yağ REMOLD BT650, kalıp ayırıcı olarak özel geliştirilmiş, çevre ile uyumlu, alifatik hidrokarbonlar, doğal esterler ve diğer performans…
Brand: Optimal
A phosphoric acid-based rust remover with a degreasing effect for iron and steel, which creates a thin phosphate layer on metal surfaces.
Brand: Optimal
Dip Type Welding Spatter Preventer WELD DEEP is a dipping type product in gel form developed to prevent hot burrs from sticking to the torch in gas shielded welding. PRODUCT CODE WEIGHT…
Brand: Optimal
Neutral Cleaning Product for Floor Cleaning Machines OPTIMAT VF X909 is a water-soluble, environmentally friendly, super-concentrated, neutral, foam-controlled industrial floor cleaning…
Brand: Optimal
Closed Circuit Heating Cooling Iron, Steel, Copper Systems Anti-Scale Corrosion OPTIGARD PENTA converts calcium and magnesium salts in boiler water into a soft, non-sticky sludge that…
Brand: Optimal
Brand: Optimal
Acidic Hard Surface Cleaner OPTICIDE PC 350 is an acidic surface cleaner containing fruit acids that complies with food regulations. It contains surfactants that facilitate cleaning…
Brand: Optimal
Poliüretan İntegral Sistem Kalıp Ayırıcı REMOLD PS 990, NDI bazlı poliüretan sistemler için solvent içeren kalıp ayırıcıdır. REMOLD PS 990, katı…
Brand: Optimal
Rust and Scale Removal Product for Ferrous and Non-Ferrous Metals
Brand: Optimal
Concentrated Toilet and Urinal Cleaner OPTICIDE WC BLOCK: Used on toilets, bathrooms, urinals, porcelain, ceramic, enamel, and stainless steel. It is a disinfectant product that…
