OPTIFLEX LS 09 HP

Lithium Silicate Based Liquid Concrete Hardener

OPTIFLEX LS 09 HP is a 9% lithium-based liquid concrete hardener with a high concentration structure, used for thickening, hardening and protecting against dusting of new or existing concrete floors.

OPTIFLEX LS 09 HP, our lithium silicate based liquid concrete hardener product, is frequently used in factories, aircraft hangars, storage areas, garages, shopping malls and parking lots.

OPTIFLEX LS 09 HP has smaller molecules than its traditional Sodium and Potassium based alternatives and it impregnates into the concrete more easily and completes its reaction in a much shorter time.

Active lithium, one of the components of OPTIFLEX LS 09 HP, causes calcium hydroxide (Ca(OH)) which is one of the concrete components and causes dust in the concrete.₂) molecules and transforms these molecules into insoluble hydrated calcium silicate (CSH) molecules, which increase surface hardness, reduce dusting, and facilitate the maintenance of concrete floors.

After the application of OPTIFLEX LS 09 HP, the chemical reaction of silicate and concrete components occurs in the upper layer of the concrete, and thanks to the protection provided by OPTIFLEX LS 09 HP, there is no flaking, peeling and exposure to moisture. Concrete is more durable than traditional surface coating and insulation materials.

ADVANTAGES

Excellent penetration capacity: up to 8 mm in polished concrete.

Increases resistance to abrasion by up to 40%.

It does not contribute to alkali-silica reaction (ASR) and cracking.

Good resistance to water penetration and staining.

It does not change the friction coefficient.

Fast hardening and protection against dust

It can be used on concrete of all ages.

Lithium content: 9%

It is economical.

It does not contain VOCs.

APPLICATION

OPTIFLEX LS 09 HP is applied to the surfaces with the help of a roller or brush.

OPTIFLEX LS 09 HP creates a dust-proof, bright and transparent appearance.

OPTIFLEX LS 09 HP provides ease of cleaning on surfaces and cost advantages in terms of time, labor and electricity consumption.

OPTIFLEX LS 09 HP, applied surfaces do not disperse or flake

OPTIFLEX LS 09 HP has water repellent properties.

OPTIFLEX LS 09 HP, if immediate shine is expected on the surfaces after application, our product should be applied to the surfaces with the help of a polishing machine.

OPTIFLEX LS 09 HP, after application, drying time is between 1-3 hours.

OPTIFLEX LS 09 HP should not be diluted with solvent or water.

ESTIMATED COVERAGE RATES

Freshly placed uncured concrete: 15-20 m²/L (50-65 mL/m²).

Steel trowel cured concrete: 10-12 m²/L (85-100 mL/m²).

Cured honed/polished concrete: 10-15 m²/L (65-100 mL/m²).

OPTIFLEX LS 18 MAX: Contains lithium silicate.

OPTIFLEX LS 12 SC: Contains lithium silicate.

OPTIFLEX LS 09 HP: Contains 9% Lithium silicate.