Closed Circuit Heating Cooling Iron, Steel, Copper Systems Anti-Scale Corrosion
OPTIGARD PENTA converts calcium and magnesium salts in boiler water into a soft, non-sticky sludge that is then flushed out of the boiler via blowdown. It prevents scale and corrosion in the system. It is used in systems containing copper, iron, brass, and hot galvanized steel.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH3396053 |
35 |
1 |
LIQUID |
|
EH3396057 |
70 |
1 |
LIQUID |
|
EH33960510 |
1200 |
1 |
LIQUID |
Brand: Optimal
Textile Stain Remover Spray TEXOL is an industrial solvent-based stain remover. It removes oil, dirt, and some ballpoint pen stains from all types of fabrics without damaging the fabric.…
Brand: Optimal
Super Concentrated Enzymatic Ultrasonic Cleaner OPTIGARD® AK 340 KM is designed for pre-cleaning and decontamination of instruments in ultrasonic baths. It is a highly effective…
Brand: Optimal
Powder, Alkaline Product Used in the Metal and Automotive Industry and in Repair Shops for Cleaning All Metals and Metals Such as Aluminum Alloys, Copper, Tin, Zinc After Cutting,…
Brand: Optimal
Silikonsuz Kalıp Ayırıcı Sprey MR 300, kalıp ile üretilen mamul arasında ince bir film tabakası oluşturarak parçanın kalıba yapışmasını önler. Parçanın…
Brand: Optimal
Brand: Optimal
Penetrating, Lubricating and Loosening Solvent PENETRAX penetrates immediately into applied surfaces, loosening rust. Loosened rust layers can be broken down quickly, allowing for…
Brand: Optimal
Liquid Inhibitor that can be used for HCL Acid Please contact our technical team for detailed information.
Brand: Optimal
-30 °C Glycol Product with Inhibitors OPTIGARD AF 30 is a glycol-based coolant containing special inhibitors, developed for all-season use in closed-circuit cooling systems for…
Brand: Optimal
Solvent Bazlı, Boyamaya ve Yapıştırmaya Elverişli, Poliüretan Kalıp Ayırıcı REMOLD P100,MDI, MDI/TDI bazlı, soğuk kürlenen PU döküm işleminde kullanılan,…
Brand: Optimal
Mold Release Spray MR 100 prevents the part from sticking to the mold by forming a thin film between the mold and the product. It allows the part to be easily removed from the mold…
