Stainless Surface Heavy Oil and Dirt Cleaner
In industrial areas, OPTINOX HD removes all contamination on stainless steel parts, allowing the surface to come into direct contact with air. It is used to clean stainless steel and all other non-ferrous metal surfaces (aluminum, copper, etc.).
It removes all types of working contamination, oil and grease stains, pitting, and heavy rust.
A clean and shiny surface is achieved.
INSTRUCTIONS FOR USE
Weld and spot stains on the surface should be cleaned with WELD BIO beforehand. OPTINOX HD is applied to the surface with a brush, cloth, or sprayed. After the reaction time, rinse with plenty of pressurized water (100-150 bar).
DOUBLE USE
Depending on the degree of contamination, it can also be used diluted 1/5-1/10 with water.
Reaction Time: 15-60 minutes. Consumption: 8-12 m²/kg.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH1383973 |
35 KG |
1 |
LIQUID |
|
EH1383977 |
70 KG |
1 |
LIQUID |
|
EH13839720 |
220 KG |
1 |
LIQUID |
|
EH13839710 |
1250 KG |
1 |
LIQUID |
Brand: Optimal
Limescale Corrosion Inhibitor in Open-Semi-Open Cooling Water Systems Fed with Hard Water In systems fed with hard water, OPTIGARD BETA reacts with the ions that impart hardness to…
Brand: Optimal
A two-phase product that removes wet and powder paint from aluminum and sheet metal surfaces without damaging the chromate or phosphate layer on the surface. Please contact our technical…
Brand: Optimal
Liquid Product Containing High Alkali, Silicate, Phosphate and Surfactants Used in the Form of Dipping in Baths in the Hot Degreasing Process Before Enameling