Weld Spot Cleaning Product
OPTINOX HIT is a highly wetting agent designed for cleaning weld seams on stainless steel surfaces.
Even if a weld spatter inhibitor is used during welding on stainless steel, the resulting weld seam must be removed.
It neutralizes the surface by removing weld, heat treatment, and all types of corrosion and rust stains, pitting, and other impurities from stainless steel surfaces without damaging or yellowing the surface.
Suitable for AISI 304, 316, and 321 and its derivatives.
It has a very short reaction time. It is fast-acting and has strong etching properties.
It is washable with water and has a slow drying time.
INSTRUCTIONS FOR USE
Remove surface oils with OPTINOX B 100. Shake until a homogeneous mixture is achieved without opening the cap. Spray or apply with a suitable brush. After the reaction time, rinse thoroughly with plenty of clean water.
The dipping process is particularly recommended for those who weld frequently. Metal parts are placed in a basket and immersed in a immersion tank using a shaker or crane.
Do not apply to hot surfaces. Wear goggles, gloves, apron, etc. when applying. If in contact with skin, rinse thoroughly with water.
USE DOSAGE
Reaction Time: (Cold draw at 20°C) 15-60 minutes. Consumption: 150-250 ml/kg
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH4607263 |
35 KG |
1 |
LIQUID |
|
EH4607266 |
70 KG |
1 |
LIQUID |
|
EH46072610 |
1200 KG |
1 |
LIQUID |
Brand: Optimal
Mold Protective Oil OPTIMOLD C70 is a long-lasting, water-insoluble mold protection oil that forms a long-lasting, dry protective layer. It provides a strong, full coating and quick…
Brand: Optimal
Biocide for Cooling Towers' Recirculating Water OPTIGARD LEO SBR is a highly active disinfectant used to inhibit bacteria, fungi, and algae in cooling towers, recirculating water,…
Brand: Optimal
Brand: Optimal
Concentrated Metal Surface Preparer OPTICIDE POWERSOL: Used to remove oil, rust, and dirt from metal surfaces before painting and coating. It microscopically penetrates the metal surface…
Brand: Optimal
Air System Cleaner for Diesel Engines OPTIMAR D85 removes carbon deposits, grease, and oil from the surfaces of diesel-powered machinery and equipment. It is used in the cleaning of…
Brand: Optimal
Dip Type Welding Spatter Preventer WELD DEEP is a dipping type product in gel form developed to prevent hot burrs from sticking to the torch in gas shielded welding. PRODUCT CODE WEIGHT…
Brand: Optimal
Lubricating, Loosening and Rust Remover Spray VERDA penetrates immediately onto applied surfaces, loosening rust. Loosened rust layers allow for immediate results in problematic areas…
Brand: Optimal
Electrical Circuit Cleaner Oily Spray TRON is a volatile cleaning solvent specially formulated for cleaning unwanted residues such as moisture, dust, and oil that accumulate over…
Brand: Optimal
Powder, Alkaline Degreasing Product that Cleans Carbonized Layers and Contamination Formed on Metal Surfaces in Dipping and Spraying Systems
Brand: Optimal
Biological Acidic Metal Cleaner BIOMET BRIGHT is a concentrated product used to remove tarnish, rust, limescale, and seawater stains from stainless steel, nickel, aluminum, brass,…
