Textile Softener Hydrophilic Micro Emulsion Silicone
OPTISOFT HS 500 is a modified, self-dispersing polyether-aminofunctional liquid silicone oil microemulsion that provides hydrophilic (water-absorbing) properties and softening. Its long-lasting hydrophilic properties give woven and knitted products a silky, flexible, and smooth touch.
OPTISOFT HS 500 is used as a textile softener to provide a soft touch and hydrophilicity in fabric finishing applications.
OPTISOFT HS 500 formulations are used as fillers in exhaust processes and can also be used alone or in combination with organic fabric softeners, polyethylene waxes, and other finishing agents. Compatibility should be tested on a case-by-case basis.
ADVANTAGES
OPTISOFT HS 500 is safely used in textile finishing, in the production of softeners and hydrophilic softeners, and in the textile and leather industries.
It is concentrated. It can be diluted with water.
It provides long-lasting hydrophilicity through moisture transfer within the fabric.
It provides a silky softness, full-bodied, flexible and smooth touch to woven and knitted products.
It ensures resistance to washing and dry cleaning.
It has no negative effect on the shade or color fastness properties of colored products.
OPTISOFT HS 500 generally does not cause any changes in the hydrophilic properties of substrates such as cellulosics, but it provides a noticeable improvement in the wetting properties of hydrophobic substrates such as polyesters.
INSTRUCTIONS FOR USE
OPTISOFT HS 500 should be diluted with soft water to prepare finishing solutions.
The recommended dilution ratio is 1:1 to 1:4 (emulsion:water). Diluted solutions can be applied by filling or exhaust methods.
For the filling method, the recommended application rate is around 10-30 g/l, depending on the desired final effect.
For the exhaust method, 1-3% OPTISOFT HS 500 solution can be used depending on the weight of the textile.
USAGE AMOUNT
The ratio is 1:1 to 1:4 (emulsion:water). Depending on the need, 10-30 g/l of the product can be used for the filling method, and 1-3% OPTISOFT HS 500 solution can be used for the exhaust method, depending on the weight of the textile.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
OPT6399053 |
30 KG |
1 |
LIQUID |
|
OPT6399056 |
60 KG |
1 |
LIQUID |
|
OPT6399052 |
200 KG |
1 |
LIQUID |
|
OPT6399051 |
1000 KG |
1 |
LIQUID |
Brand: Optimal
Biological Floor Cleaning Product OPTIBIOL FLOOR is a concentrated, foam-adjustable industrial cleaner used in all industrial areas to remove mineral oil, synthetic oil, grease,…
Brand: Optimal
Brand: Optimal
Brand: Optimal
Concentrated Disinfectant Scented Hand Washing Foam FOAMYDES XL is a disinfectant, perfumed hand washing foam containing extra hand protectors and moisturizers. It is safely used in…
Brand: Optimal
A phosphoric acid-based rust remover with a degreasing effect for iron and steel, which creates a thin phosphate layer on metal surfaces.
Brand: Optimal
Liquid Zinc Phosphate Product Applied to Iron and Steel Surfaces by Dipping Method, Creating Less Sludge
Brand: Optimal
Solvent-Based Boron-Free Protective Oil OPTIMOLD SOL 56 is a solvent-based, high-flash-point corrosion preventive oil that can be used safely in industrial applications, both during…
Brand: Optimal
Acidic, inhibitory product that can clean iron and derivative materials at ambient temperature in hot galvanizing and zinc coating plants.
Brand: Optimal
Brand: Optimal
Electrochemical Passivation Electrolyte OPTIGARD® AC X808It is an electrolyte cleaning solution with an electrochemical structure that, thanks to its special structure, removes…
