Sporisidal Peroksit
OPTISOL® STROX 600 WFI is a ready-to-use hard surface sporicidal disinfectant solution containing 6% hydrogen peroxide mixed with water for injection (WFI).
OPTISOL® STROX 600 WFI offers complete protection and elimination against all microorganisms, including bacteria, yeasts, fungi, spores, and viruses, that are invisible to the naked eye.
OPTISOL® STROX 600 WFI is safely used as a sterilizer, sporicidal, or disinfectant for cleanroom environmental surfaces, isolators, and equipment in the food processing industry, beverage sector, pharmaceutical, pharmacology, biotechnology, medical product manufacturing, research laboratories, cosmetics, and food industries.
OPTISOL® STROX 600 WFI is highly effective in Laminar Air Flow (LAF) laboratories for ensuring a contamination-free environment.
OPTISOL® STROX 600 WFI is suitable for use on insulators, LAFs, equipment exteriors, and production tanks.
Thanks to its very low residue content, OPTISOL® STROX 600 WFI can be used to control most contamination risks without the need for wiping with alcohol or water.
MATTER COMPATIBILITY
OPTISOL® STROX 600 WFI does not damage stainless steel, plastic, and ceramic surfaces. It is also suitable for use on galvanized surfaces. At the application concentration, it does not damage PVC, PP, PE, PA, NBR, EP DM, Teflon materials, or gaskets.
APPLICATION
OPTISOL® STROX 600 WFI is ready to use. It is applied by spraying onto surfaces from a distance of 10-20 cm. Always close the spray nozzle after use.
It is particularly used on floors, walls, hard surfaces, and in transfer disinfection. Before application, surfaces must be cleaned and free of dirt. This can usually be done by rinsing with pure water, mechanical treatment, or the use of a germicidal detergent.
Wetting: For rapid disinfection, surfaces can be disinfected using a spraying and wiping technique.
PACKAGING
|
PRODUCT CODE |
VOLUME |
PIECE |
FORM |
|
OPT94512215 |
5L |
4X5 AD |
LIQUID |
|
OPT94512212 |
20 L |
1 |
LIQUID |
|
OPT94512213 |
30 L |
1 |
LIQUID |
|
OPT94512216 |
60 L |
1 |
LIQUID |
|
OPT94512211 |
1.000 L |
1 |
LIQUID |
Brand: Optimal
Liquid Product That Creates a Dark Gray to Black Manganese Phosphate Layer on Iron and Steel Surfaces by Dipping Method
Brand: Optimal
Neutral Product Containing Organic Corrosion Inhibitor Used to Remove Degreasing from Steel, Iron and Non-Ferrous Metals
Brand: Optimal
A product that removes oxidation and hardening caused by water hardness on the surfaces of metals such as iron, pig iron, copper, brass and aluminum without causing any abrasion or…
Brand: Optimal
Brand: Optimal
Closed and Open Circuit Lime and Sediment Remover OPTICIDE ORCA: This chemical product removes limestone, rust, and mineral deposits from cooling systems, heat exchangers, boilers,…
Brand: Optimal
Brand: Optimal
Biological Deodorizer for Pumping Stations and Sewer Systems OPTIBIOS 430 is a synergistic blend specifically formulated for the removal of oils and greases, used to eliminate unpleasant…
Brand: Optimal
Biological Floor Cleaning Product OPTIBIOL FLOOR is a concentrated, foam-adjustable industrial cleaner used in all industrial areas to remove mineral oil, synthetic oil, grease,…
Brand: Optimal
Silikon Bazlı Kalıp Ayırıcı Sprey MR 500, kalıp ile üretilen mamul arasında ince bir film tabakası oluşturarak parçanın kalıba yapışmasını önler.…
Brand: Optimal
Industrial Concentrated, Colorless, Odorless, Disinfectant, Surface Cleaner OPTIDES SURFACE is an excellent product based on decyldimethylammonium chloride (DDAC), specially formulated…
