Automatic Welding Robot Torch Protector
In automatic welding robots, WELD ROBOT prevents spatter from adhering to the torch and keeps it clean.
INSTRUCTIONS FOR USE
WELD ROBOT anti-spatter fluid is filled into the robot's existing reservoir. The robot torch is immersed in the reservoir at regular intervals.
DOUBLE USAGE
Use as a concentrate without dilution.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH4076733 |
30 KG |
1 |
LIQUID |
|
EH4076736 |
60 KG |
1 |
LIQUID |
|
EH40767320 |
200 KG |
1 |
LIQUID |
|
EH40767310 |
1000 KG |
1 |
LIQUID |
Brand: Optimal
Concentrated Office Liquid Hand Sanitizer OFFICE: Concentrated. Due to its excellent degreasing and subsequent hand-repairing properties, it is a hand sanitizer safely used for hand,…
Brand: Optimal
Algae, Bacteria and Fungi Preventive OPTIGARD PARA prevents the growth of algae, bacteria and fungi that may occur in industrial cooling systems and eliminates existing biological…
Brand: Optimal
Brand: Optimal
Rinsing and Neutralization Product for Medical Devices OPTIGARD® AC 500-NP is a phosphoric acid-based liquid neutralizing agent used after washing surgical instruments and medical…
Brand: Optimal
A two-component zinc phosphate coating product applied by spraying, forming a homogeneous, corrosion-resistant, fine-crystalline and paint performance-enhancing layer on steel, iron…
Brand: Optimal
A self-accelerating liquid product applied by dipping method, which increases corrosion resistance and paint adhesion on iron surfaces and creates fine crystalline zinc phosphate.
Brand: Optimal
Brand: Optimal
Oil-Based Corrosion Inhibitor OPTICOR OIL is an oil-based corrosion inhibitor product that protects metals from corrosive effects during storage and transportation. PRODUCT CODE WEIGHT…
Brand: Optimal
Concentrated, Water-Dilutable, VOC-Free, Long-Term Effective Corrosion Inhibitor OPTICOR WX 3900 is a blend of lubricants and organic corrosion inhibitors that provide long-term protection.…
Brand: Optimal
Silicone-Free Mold Release Spray MR 300 prevents the part from sticking to the mold by forming a thin film between the mold and the product. It allows the part to be easily removed…
